Karcher 7.5m Pipe & Drain Cleaning Hose Stock Number: ES953821
Clears blocked pipes and drains without the need for harsh chemicals
-
Chris at eSpares says...
This will fit any standard Karcher spray gun that accepts fittings with a bayonet connector.
-
Chris at eSpares says...
This should be fine for use on toilet pipes as they will be 100mm or 4 inch diameter. However it is not likely the hose would go around a 90 degree bend on a 1 1/2 inch (38mm) diameter pipe.
-
Chris at eSpares says...
It should be able to get past a 3" S bend but due to the greater friction on the hose it may not 'self propel' itself very far after this. It will also depend on how far the bend is from the access point, the further the more friction and weight the jets have to overcome when pulling.
could you please advise - would this drain cleaning kit be suitable to use on a karcher 411A pressure washer? 1 Answer
-
Chris at eSpares says...
This is suitable for all Karcher pressure washers that have detachable lances with a bayonet connection as shown in the picture.
Will this work from my cesspool interceptor inspection manhole which I believe is 6inch pipe and has I think a "U" bend in the lower pipe. Will be able to push around it please. Thanking you in anticipation.
-
Chris at eSpares says...
This can go around "U" bends and should be suitable for your problem.
I have a k2.56 pressure washer will this fit onto the trigger gun I have, I don't understand what is meant by bayonet, the attachments we have just click on. 1 Answer
-
Chris at eSpares says...
This should go be able to go around a standard 4 inch drain bend . For more details see our video: http://www.espares.co.uk/advice/12/1248/how-to-clear-a-blocked-drain
-
Chris at eSpares says...
By burrowing into the blockage and breaking it up it allows the smaller parts to flow away.
Your video showing how to clear the drain blockage,using Karcher Drain Cleaning Kit was quite good,BUT you FORGOT to show how to connect the Drain Cleaning Kit to Karcher Pressure washer ! oooobbbbssss !!!!
- Well although a bit late, just remove the nozzle from the gun and attach the Drain kit
- I used it to clear the shower run off, but it was not too effective as it was not flexible enough to go round the bends. Where I did manage to use it though it was very good.
Will this part fit my appliance?
Check Now