Fan Oven Element - 2000W

If the internal element filament burns out, this can cause the element to short circuit - and will lead it to fail. Potential signs that the element has blown can be visual things, such as a split, bulge, or blow hole on the element.

The function of the fan oven element is to heat the oven cavity. When the cooker knob is turned on for your electric cooker, electricity will flow to the element which then proceeds to heat up. Once the element reaches the desired temperature, the electricity flow switches on and off to maintain the temperature.

eSpares has the replacement fan oven element, that could soon be yours, to help get your fan oven back to the required temperature - so you can continue to make your delicious meals!

Specification:

• Length: 234mm (from the bracket end to the opposite bracket end)
• Width: 190mm (at the widest point)
• Rear Bracket: 70mm
• Tags: 25mm
• 3 Turn
• Wattage: 2000W
• 230V

Genuine spare part suitable for select models of Smeg and John Lewis cookers.

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Please note: This is a 'new style' fan element and will require the following adjustments for 'old style' cavities (pre Nov 2006). 2x fixing screws (899370148) are required as the fixing studs are no longer present. The nuts from the previous element should be retained and reused as these are not supplied. When the element is screwed onto the cavity, the Earth wire should be attached or secured to one of the nuts as the Earth connector is no longer present, alternatively use a ring tag. When connecting this element please isolate the earth lead (if your cooker has one) as the element will be earthed when screwed back onto the cooker.