High-Quality Replacement Fan Oven Element - 2000W

Oven elements fail when the internal element filament burns out which can cause the element to short circuit. There may be visible signs the element has blown such as a split, bulge, or blowhole on the element. Other signs of a failed element include; the oven not heating up, the oven blowing out cold air or bright spots during use.

Make sure your cooker or oven is heating up correctly by replacing your faulty circular oven element, with the help of eSpares. 

Specification:

• Length: 233mm (from the bracket end to the opposite bracket end)
• Width: 190mm (at the widest point)
• Rear Bracket: 70mm
• Tags: 25mm
• 2 Turn
• 2000W
• 230V

High quality replacement part for select models of Whirlpool, Ignis and Smeg and Bauknecht cookers.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Please note: This is a 'new style' fan element and will require the following adjustments for 'old style' cavities (pre Nov 2006). 2x fixing screws (899370148) are required as the fixing studs are no longer present. The nuts from the previous element should be retained and reused as these are not supplied. When the element is screwed onto the cavity, the Earth wire should be attached or secured to one of the nuts as the Earth connector is no longer present, alternatively use a ring tag. When connecting this element please isolate the earth lead (if your cooker has one) as the element will be earthed when screwed back onto the cooker.